TM-9-2350-277-20-3 Unit Maintenance Manual Volume 3 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 671 of 962
TM 9-2350-277-20-3 REPLACE RADIAC WIRE HARNESS (M113A3, M577A3, AND M1068A3 ONLY) 0376 00 THIS WORK PACKAGE COVERS: Removal (page 0376 00-1). Installation (page 0376 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0926 00, Item 65) M a t e r i a l s / P a r t s Cord (WP 0928 00, Item 31) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine Stopped (see your -10) Carrier blocked (see your -10) Ramp lowered (see your -10) Battery ground strap disconnected (WP 0337 00) or (WP 0338 00) REMOVAL 1. Remove four clips (1) and RADIAC harness (2) from four cradles (3). 2. Remove electrical connectors (4) from end of harness (2) (WP 0382 00). 3. Tie 12-foot (3.7 m) cord to harness (2). 4. Pull harness (2) and cord through cross beam (5). Untie cord from harness (2), leaving cord in cross beam. 0376 00-1