TM-9-2350-277-20-3 Unit Maintenance Manual Volume 3 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 631 of 962
TM 9-2350-277-20-3 REPLACE STEERING LOCK SWITCH WIRING HARNESS (M58 ONLY) — Continued 0367 01 2. Install wiring harness (1) on bracket (12). Secure with strap (3). NOTE Do Step 3 for solenoid-activated lock only. 3. Install circuit 368A lead (5), ground lead (6), two nuts (8) and lockwashers (7) on solenoid terminals (4). 4. Connect circuit leads 369 and 369A (used on solenoid-activated lock) or leads 369A and 368 (used on cable-activated lock) (1) and (2) to steering locked indicator switch (3). FOLLOW-THROUGH STEPS 1. Connect battery ground strap (WP 0337 00), (WP 0338 00), or (WP 0339 00). 2. Turn MASTER SWITCH to ON (see your -10). 3. Place transmission controller in SL position. Check that steering wheel is locked and that STEERING LOCKED indicator is on (see your -10). 4. Turn MASTER SWITCH to OFF (see your -10). END OF TASK 0367 01-3/4 blank Change 1