TM-9-2350-277-20-3 Unit Maintenance Manual Volume 3 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 576 of 962
TM 9-2350-277-20-3 REPLACE REAR MAIN WIRING HARNESS (M1068A3 ONLY) — Continued 0365 00 23. Disconnect circuit 30 lead (1) from left fuel quantity sending unit (2). 24. Remove lockwire (3), one screw (4), lockwasher (5), and ground lead (6) from sending unit (2). Discard lockwire and lockwasher. 25. Remove three screws (7), clamps (8), lockwashers (9), and ground lead (6) from weldnuts (10). Remove clamps from circuit 30 lead (1). Discard lockwashers. 26. Disconnect circuit 402 lead (11) from personnel heater fuel pump (12). 27. Remove screw (13), lockwasher (14), and clamp (15) from weldnut (16). Remove clamp from rear main wiring harness (17). Discard lockwasher. 28. Remove two screws (18), locknuts (19), clamp (20), and rear main wiring harness (17) from floor transverse beam (21). Discard locknuts. 29. Remove screw (22), locknut (23), and clamp (20) from rear main wiring harness (17). Discard locknut. 30. Remove three screws (24), lockwashers (25), clamps (26), and rear main wiring harness (17) from weldnuts. Discard lockwashers. 0365 00-6 Change 1