TM-9-2350-277-20-3 Unit Maintenance Manual Volume 3 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 549 of 962
TM 9-2350-277-20-3 REPLACE REAR MAIN WIRING HARNESS (M1064A3 ONLY) — Continued 0364 00 6. Remove nut (1), washer (2), and rubber bushing (3) around harness (4) from connector (5). 7. Remove connector (5) from hull. 8. Pull harness (4) through hole in hull top. Leave connector (5), rubber bushing (3), washer (2), and nut (1) on harness. 9. Remove screw (6), locknut (7), clamp (8), and harness (4) from upper bilge tube clamp (9). Discard locknut. 10. Remove two screws (10), lockwashers (11), clamps (12), and harness (4) from two lower bilge tube clamps (13). Discard lockwashers. 0364 00-3