TM-9-2350-277-20-3 Unit Maintenance Manual Volume 3 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 512 of 962
TM 9-2350-277-20-3 NOTE The M58 does not use connector, bushing, and hardware only adhesive sealant on wiring harness in hull opening. 45. Route circuit 23 (25), 24 (26), and 31 (27) leads through connector (28) out of hull. Install connector on top of hull (from inside hull). (All except M58.) NOTE The M58 does not use connector on wiring harness in hull opening. On M58, route leads through opening in hull. Apply adhesive sealant around harness, filling opening to a depth of 0.5 to 1.5 inches (1.27 to 3.81 cm). 46. Install rubber bushing (29) with leads (25), (26), (27) into connector (28). Secure rubber bushing in connector with nut (30) and washer (31). (All except M58.) 0362 00-34 Change 2 0362 00 REPLACE REAR MAIN WIRING HARNESS (M113A3, M1059A3, AND M58) — Continued