TM-9-2350-277-20-3 Unit Maintenance Manual Volume 3 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 505 of 962
TM 9-2350-277-20-3 NOTE The M58 does not use connector on wiring harness in hull opening. On M58, route leads through opening in hull. Apply adhesive sealant around harness, filling opening to a depth of 0.5 to 1.5 inches (1.27 to 3.81 cm). 23. Route circuit 21 (12), 22 (13), 24 (14), and 30 (15) leads through connector (16) and out of carrier. Install connector on rear top of hull. (All except M58.) NOTE The M58 does not use connector, bushing, and hardware only adhesive sealant on wiring harness in hull opening. 24. Install rubber bushing (17) into connector (16). Secure bushing and leads in connector with nut (18) and washer (19). (All except M58.) 0362 00-27 REPLACE REAR MAIN WIRING HARNESS (M113A3, M1059A3, AND M58) — Continued 0362 00 Change 2