TM-9-2350-277-20-3 Unit Maintenance Manual Volume 3 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 486 of 962
TM 9-2350-277-20-3 16. Remove screw (1), lockwasher (2), and clamp (3) that secure bilge pump tube clamp (4) and wiring harness (5) on weldnut. Discard lockwasher. 17. Remove two screws (6), nuts (7), and clamp (8) from floor transverse beam (9). NOTE Only the M58 and M1059A3 have the lockwasher. 18. Remove screw (10), nut (11), and clamp (8) from circuit 451 lead (12). 19. Remove three screws (13), lockwashers (14), clamps (15), and circuit 451 lead (12) from weldnut. Discard lockwashers. 0362 00-8 Change 2 0362 00 REPLACE REAR MAIN WIRING HARNESS (M113A3, M1059A3, AND M58) — Continued