TM-9-2350-277-20-3 Unit Maintenance Manual Volume 3 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 435 of 962
TM 9-2350-277-20-3 REPLACE BATTERY TO MASTER SWITCH LEAD (CIRCUIT 6) (M113A3 AND M1059A3 ONLY) — Continued 0356 00 4. Route circuit 6 lead (1) through hull support channel (2). 5. Install two clamps (3) on circuit 6 lead (1). Secure with two screws (4) and new lockwashers (5). 6. Install new grommet (6) on circuit 6 lead (1). Route lead through side of front battery box (7). 7. Install circuit 6 lead (1) and positive jumper lead (8) on positive terminal (9) of front battery. Secure with screw (10) and nut (11). FOLLOW-THROUGH STEPS 1. Install battery access covers (see your -10). 2. Connect battery ground strap (WP 0337 00). 3. Close spall liners (see your -10). 4. Start engine (see your -10). 5. Raise and lock ramp (see your -10). 6. Stop engine (see your -10). END OF TASK 0356 00-5/6 blank Change Change 2