TM-9-2350-277-20-3 Unit Maintenance Manual Volume 3 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 42 of 962
TM 9-2350-277-20-3 REPLACE GENERATOR/BRACKET — Continued 0255 00 NOTE Do Step 7 and Step 8 if bracket was removed. NOTE Do not tighten bracket mounting screws until all mounting screws have been installed. All three screws require a specific torque. 7. Position bracket (1) on engine block and install screw (2) and washer (3). Align bracket holes with block holes and install screws (5) and (6) and washers (4) and (7). 8. Tighten screws (2), (5), and (6) to the following torque values: Torque Values S C R E W T O R Q U E 2 32-34 lb-ft (43-46 N m) 5 36-38 lb-ft (49-52 N m) 6 32-34 lb-ft (43-46 N m) 0255 00-8