TM-9-2350-277-20-3 Unit Maintenance Manual Volume 3 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 419 of 962
TM 9-2350-277-20-3 REPAIR BATTERY DRAWER (M1064A3 ONLY) — Continued 0353 00 4. Remove three locknuts (1), washers (2), screws (3), and plate (4) from side of battery drawer (5). Discard locknuts. 5. Remove two locknuts (6), washers (7), screws (8), and channel divider (9) from battery drawer (5). Discard locknuts. 6. Remove locknut (10), cam (11), handle (12), and washer (13) from battery drawer (5). Remove key (14) from handle. Discard locknut. 7. If needed, remove locknut (15), screw (16), and wear plate (17) from hull mount. 8. If needed, remove two rubber bumpers (18) from front of battery drawer (5). CLEANING CLEANING AND INSPECTION 1. Inspect slide assemblies. If the slide binds or has damaged stops, install a new slide. 2. Clean drawer and parts by soaking in a solution of sodium bicarbonate and water. After foaming stops, flush with clean water and dry with clean cloth. 3. Inspect battery drawer for dents and cracks. If damaged beyond repair, install new drawer. 0353 00-3