TM-9-2350-277-20-3 Unit Maintenance Manual Volume 3 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 404 of 962
TM 9-2350-277-20-3 REPLACE BATTERIES AND RETAINERS (M1064A3 ONLY) — Continued 0349 00 INSTALLATION WARNING Battery is heavy and can cause back injury if handled improperly. Be sure to have helper assist to install battery. Battery weighs about 75 lb (34 kg). C A U T I O N Place batteries with positive (+) and negative (-) terminals as shown in diagram. Damage to components will occur if batteries are hooked up wrong. 1. Place batteries (1) in battery box (2). 2. Place hooks (3) in battery frame (4). 3. Place two retainers (5) on two hooks (3). Secure with two washers (6) and nuts (7). 4. Place clamp (8) on two retainers (5). Secure with washer (9) and bolt (10). FOLLOW-THROUGH STEPS 1. Install terminal lugs and connect battery leads (left side) (WP 0343 00) and install terminal lugs and connect battery leads (right side) (WP 0343 00). 2. Turn MASTER SWITCH ON to check that battery is installed correctly. MASTER SWITCH ON light should come on (see your -10). 3. Start engine (see your -10). 4. Raise and lock ramp (see your -10). 5. Stop engine (see your -10). END OF TASK 0349 00-4 Change 1