TM-9-2350-277-20-3 Unit Maintenance Manual Volume 3 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 291 of 962
TM 9-2350-277-20-3 REPLACE ENGINE OIL LOW PRESSURE TRANSMITTER AND HARDWARE — Continued 0320 00 INSTALLATION NOTE Coat male tapered threads with sealing compound. 1. Install reducer (1) and elbow (2) on engine. 2. Install nipple (3) and tee (4) on elbow (2). 3. Install adapter (5) in tee (4). 4. Connect hose (6) to adapter (5). 5. Install pressure transmitter (7) in tee (4). 6. Secure pressure transmitter (7) to bracket (8) with clamp (9), screw (10), two washers (11), and new locknut (12). 7. Connect circuit 34 lead (13) to pressure transmitter (7). FOLLOW-THROUGH STEPS 1. Turn MASTER SWITCH ON (see your -10). 2. Check the ENGINE OIL LOW PRESS light is on (see your -10). 3. Start engine (see your -10). ENGINE OIL LOW PRESS light should go off. 4. Check for oil leaks at engine low oil pressure transmitter (see your -10). 5. Stop engine (see your -10). 6. Install driver’s power plant access panel (see your -10). END OF TASK 0320 00-3/4 blank