TM-9-2350-277-20-3 Unit Maintenance Manual Volume 3 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 29 of 962
TM 9-2350-277-20-3 ADJUST GENERATOR DRIVE BELT — Continued 0252 00 8. Adjust drive belt as follows: a. Loosen two support screws (1) on top of generator (2). b. Loosen jamnut (3) and adjust turnbuckle (4) until belt is at the right tension. Tighten jamnut. c. TIGHTEN TWO SUPPORT SCREWS (1) TO 56-61 LB-FT (76-81 N m) TORQUE. FOLLOW-THROUGH STEPS 1. Install rear power plant access panels (see your -10). END OF TASK 0252 00-3/4 blank