TM-9-2350-277-20-3 Unit Maintenance Manual Volume 3 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 143 of 962
TM 9-2350-277-20-3 REPLACE INSTRUMENT PANEL ASSEMBLY (ALL EXCEPT M58) — Continued 0279 00 15. Connect two circuit 40 leads (1) and (2) to lamp assembly (3). 16. Connect lead 33 (4) and special purpose harness lead 27B (5) to engine coolant temperature gauge (6). 17. Connect front main harness connector (7) to main light switch (8). 18. Connect lead 450B (9), lead 450 (10), lead 451A (11), and lead 452A (12) to bilge pump switch (13). 19. Connect lead 452B (14) to bilge front pump ON indicator (15). 20. Connect lead 451B (16) to rear bilge pump ON indicator (17). 21. Connect special purpose harness lead 27A (18) and lead 28 (19) to fuel gauge (20). 22. Connect special purpose harness lead 459 (21) to master switch indicator (22). FOLLOW-THROUGH STEPS 1. Install two ground leads, mounts, and instrument panel on struts (WP 0295 00). 2. Install tachometer and speedometer cables on instrument panel gauges (WP 0858 00). 3. Connect battery ground strap (WP 0337 00), (WP 0338 00), or (WP 0339 00). END OF TASK 0279 00-7/8 blank Change 1