TM-9-2350-277-20-2 Unit Maintenance Manual Volume 2 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 641 of 790
TM 9-2350-277-20-2 REPLACE VENTILATING FAN ASSEMBLY — Continued 0247 00 INSTALLATION NOTE Fill on level ground. 1. Fill fan drive right angle gearbox (6) (WP 0155 00). 2. Install fan drive pulley (1) on fan assembly (2) (WP 0244 00). 3. Attach sling and suitable lifting device of at least 150 lbs (68 kg) capacity to fan assembly (2). Lift fan assembly and install on power plant grill (3). 4. Install six screws (4) and washers (5). TIGHTEN SCREWS TO 24-28 LB-FT (33-38 N M) TORQUE. FOLLOW-THROUGH STEPS 1. Lower power plant grill (WP 0464 00). END OF TASK 0247 00-3/4 blank