TM-9-2350-277-20-2 Unit Maintenance Manual Volume 2 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 543 of 790
TM 9-2350-277-20-2 REPLACE EXHAUST MUFFLER AND BRACKET 0224 00 THIS WORK PACKAGE COVERS: Removal (page 0224 00-1). Installation (page 0224 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0926 00, Item 65) M a t e r i a l s / P a r t s Cotter pin Locknut (2) Lockwasher (2) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Trim vane lowered (see your -10) Power plant front access door opened (see your -10) Power plant grill raised (WP 0464 00) Exhaust elbows removed (WP 0221 00) Muffler extension and cap removed (WP 0223 00) REMOVAL 1. Remove two screws (1), four washers (2), and two locknuts (3) that secure muffler (4) to bracket on hull. Discard locknuts. 2. Loosen clamp (5) securing muffler (4) to connector on air cleaner. 3. Remove two screws (6), lockwashers (7), and washers (8) that secure bracket (9) to sponson. Remove muffler (4) from carrier. Discard lockwashers. 4. Remove cotter pin (10) and straight headed pin (11) from muffler (4) and bracket (9). Remove bracket. Discard cotter pin. 0224 00-1