TM-9-2350-277-20-2 Unit Maintenance Manual Volume 2 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 535 of 790
TM 9-2350-277-20-2 REPLACE ENGINE EXHAUST ELBOWS AND DOUBLE FLEX JOINT — Continued 0221 00 INSTALLATION 1. Install elbow (1) and clamp (2) on muffler (3). 2. Install two V-clamps (4), new gaskets (5), and retainers (6) on double flex joint (7). 3. Install double flex joint (7) and two clamps (4) on elbows (1) and (8). 4. Install elbow (8) and clamp (9) on turbocharger. Tighten clamps (2) and (9). 5. Rap clamp firmly with mallet while tightening nut and bolt on two clamps (4). TIGHTEN NUT TO 36-53 LB-IN (4-6 N m) TORQUE. FOLLOW-THROUGH STEPS 1. Lower power plant grill (WP 0464 00). 2. Close power plant front access door (see your -10). 3. Raise trim vane (see your -10). END OF TASK 0221 00-3/4 blank