TM-9-2350-277-20-2 Unit Maintenance Manual Volume 2 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 52 of 790
TM 9-2350-277-20-2 PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS), INCLUDING LUBRICATION INSTRUCTIONS — Continued 0155 00 Table 17. Fluids For General Purpose Applications LUBRICANT EXPECTED TEMPERATURE PL-S (VV-L-800) Lubricating OIl, General Purpose, Preservative, Water Displacing, Low Temperature PL-S (O-190) -70 F to 120 F (-57 C to 49 C) PL-M (MIL-L-3150) Lubricating Oil, Preservative, Medium PL-M (O-192) 30 F to 120 F (-1 C to 49 C) EXPLANATION OF PMCS TABLE ENTRIES (1) Item Number Column — Numbers in this column are for reference. When completing DA Form 2404 (Equipment Inspection and Maintenance Worksheet), include the item number for the check/service indicating a fault. Item numbers also appear in the order that you must do the checks and services for the intervals listed. (2) Interval Column — This column tells you how often you must perform the checks/services. Semi-Annual checks/services must be performed every six months or after 1500 (2400 km) of operation. (3) Man-Hour Column — This column gives the man-hours (to the nearest 10th of an hour) needed to complete the prescribed lubrication service. This column is used only for lubrication services. (4) Item To Be Checked or Serviced Column — This column lists the item to be checked or serviced. (5) Crewmember/Procedure Column — This column gives the procedure you must do to check or service the item listed in the Item To Be Checked or Serviced column to know if the equipment is ready or available for its intended mission or for operation. You must do the procedure at the time stated in the interval column. (6) Equipment Not Ready/Available If: Column — Information in this column tells you what faults will keep your equipment from being capable of performing its primary mission. If you perform check and service procedures that show faults as listed in this column, do not operate the equipment. Follow standard operating procedures for maintaining the equipment or reporting equipment failure. 0155 00-32 Change 3