TM-9-2350-277-20-2 Unit Maintenance Manual Volume 2 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 514 of 790
TM 9-2350-277-20-2 REPLACE THROTTLE VALVE (TV) MODULATOR AND LEVER — Continued 0218 00 INSTALLATION NOTE Apply a light coat of sealing compound to male pipe threads before installation. Do not coat leading thread. 1. Install elbow (6) in throttle valve pressure test port on transmission (4) in the 1:00 to 2:00 o’clock position. 2. Install pipe plug (5) in pipe elbow (6). C A U T I O N If preformed packing comes with throttle valve modulator, discard packing. The packing is not required because there is an oil seal already installed inside the transmission, and the packing does not allow for proper fit of the modulator into the transmission. NOTE Make sure modulator is in idle position before installing modulator on transmission. 3. Install modulator (3) in transmission (4). Secure with retainer (2) and new self-locking bolt (1). 0218 00-4