TM-9-2350-277-20-2 Unit Maintenance Manual Volume 2 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 507 of 790
TM 9-2350-277-20-2 REPLACE FUEL CONTROL SHAFT AND LINKAGE — Continued 0217 00 C A U T I O N Use caution when removing linkage from pin due to spring on linkage. 5. Remove nut (1) and washer (2) from linkage (3). Remove linkage (3) from pin (4). 6. Remove locknut (5) and washer (6) holding bearing (7) to shaft (8). Discard locknut. 7. Hold bearing (7) and remove screw (9) from bearing. Remove washer (10), lockwasher (11) and screw (9) from bulkhead. Remove bearing (7) from shaft (8). 8. Remove shaft (8) from bearing (12). 9. Remove screw (13) from bearing (12). Remove bearing (12) from bulkhead. Remove washer (14), lockwasher (15) and screw (13) from bulkhead. 10. Remove cotter pin (16), washer (17), and pin (4) from lever (18). Discard cotter pin. 0217 00-3