Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-277-20-2 Unit Maintenance Manual Volume 2 M113A3 M577A3 M1064A3 M1068A3 M58 Download

Page 486 of 790

TM 9-2350-277-20-2 ADJUST THROTTLE VALVE (TV) MODULATOR — Continued 0213 00 WARNING Make sure parking brake is set before you start engine. Carrier could lurch and injure you. 9. Start engine and let idle with shift lever in the STEER LOCK (SL) position for 10 minutes or until engine reaches operating temperature (see your -10). 10. Depress accelerator fully to increase engine speed to full governed RPM. Pressure gauge should read from 94 to 98 psi (648 to 676 kPa). 11. If the pressure reading is below 94 psi (648 kPa), COURSE adjust throttle valve modulator linkage first by turning two adjusting nuts (7), one turn at a time, to the left, and then FINE adjust throttle valve modulator linkage by turning two adjusting nuts (8), one turn at a time, to the right. 12. If the pressure gauge reading is above 98 psi (676 kPa), COURSE adjust throttle valve modulator linkage first by turning two adjusting nuts (7), one turn at a time to the right, and then FINE adjust throttle valve modulator linkage by turning two adjusting nuts (8), one turn at a time, to the left. 13. Stop engine (see your -10). 0213 00-4