TM-9-2350-277-20-2 Unit Maintenance Manual Volume 2 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 482 of 790
TM 9-2350-277-20-2 REPLACE GLOW PLUG CONTROLLER MOUNTING BRACKET — Continued 0212 00 INSTALLATION 1. Install mounting bracket (1), two spacers (2), washers (3), new lockwashers (4), and long screws (5) on front of engine. TIGHTEN SCREWS TO 192-240 LB-IN (22-27 N m) TORQUE. USE TORQUE WRENCH. 2. Install two washers (6), new lockwashers (7), and short screws (8) into front of mounting bracket (1). TIGHTEN SCREWS TO 46-50 LB-FT (62-68 N m) TORQUE. USE TORQUE WRENCH. 3. Install glow plug controller (9), four washers (10), two new lockwashers (11), bolts (12), and nuts (13) on mounting bracket (1). FOLLOW-THROUGH STEPS 1. Connect battery ground strap (WP 0337 00), (WP 0338 00), or (WP 0339 00). 2. Install engine access panel (see your -10). END OF TASK 0212 00-2