TM-9-2350-277-20-2 Unit Maintenance Manual Volume 2 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 481 of 790
TM 9-2350-277-20-2 REPLACE GLOW PLUG CONTROLLER MOUNTING BRACKET 0212 00 THIS WORK PACKAGE COVERS: Removal (page 0212 00-1). Installation (page 0212 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0926 00, Item 65) Torque wrench (WP 0926 00, Item 81) Torque wrench (WP 0926 00, Item 82) M a t e r i a l s / P a r t s Lockwasher (4) Lockwasher (2) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Rear power plant access panel removed (see your -10) Battery ground strap disconnected (WP 0337 00), (WP 0338 00), or (WP 0339 00) REMOVAL 1. Remove two bolts (1), lockwashers (2), nuts (3), four washers (4), and glow plug controller (5) from mounting bracket (6) on front of engine. Discard lockwashers. 2. Remove two short screws (7), lockwashers (8), and washers (9) from front of mounting bracket (6). 3. Remove two long screws (10), lockwashers (11), washers (12), spacers (13), and mounting bracket (6) from engine. Discard lockwashers. 0212 00-1