TM-9-2350-277-20-2 Unit Maintenance Manual Volume 2 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 477 of 790
TM 9-2350-277-20-2 REPLACE GLOW PLUG POWER HARNESS 0211 00 THIS WORK PACKAGE COVERS: Removal (page 0211 00-1). Installation (page 0211 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0926 00, Item 65) M a t e r i a l s / P a r t s Lockwasher (3) Tie straps (as required) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Driver’s power plant access panel removed (see your -10) Rear power plant access panel removed (see your -10) Battery ground strap disconnected (WP 0337 00), (WP 0338 00), or (WP 0339 00) REMOVAL 1. Remove nut (1), lockwasher (2), and red double lead (3) from battery terminal (4) on solenoid (5). Do not remove other leads. Reinstall nut on battery terminal. Discard lockwasher. 2. Remove nut (6), lockwasher (7), and orange switch lead (8), from switch terminal (9) on solenoid (5). Do not remove other leads. Reinstall nut on switch terminal. Discard lockwasher. 3. Remove nut (10), lockwasher (11), and blue ground lead (12) from ground terminal (13) on solenoid (5). Do not remove other leads. Reinstall nut on ground terminal. Discard lockwasher. 0211 00-1