TM-9-2350-277-20-2 Unit Maintenance Manual Volume 2 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 471 of 790
TM 9-2350-277-20-2 REPLACE GLOW PLUG HARNESS AND GLOW PLUGS — Continued 0209 00 INSTALLATION 1. If removed, install two clips (1) on each side of glow plug harness (2). 2. Connect glow plug harness (2) to right side (3) of glow plug controller (4). 3. Install three glow plugs (5) in left cylinder head (6). TIGHTEN GLOW PLUGS TO 132-156 LB-IN (15-18 N m) TORQUE. C A U T I O N Glow plug harness leads are identified with location as to right or left bank. Correct installation of wires is necessary for proper diagnostics to aid in locating a failed glow plug. 4. Connect three plug ends (7) of glow plug harness (2) to glow plugs (5) in left cylinder head (6). 5. Secure glow plug harness (2) to two brackets (8) on left side cylinder (6) with two clips (1), bolts (9), and nuts (10). TORQUE BOLTS TO 360-420 LB-IN (41-47 N m). 6. Repeat Steps 2 - 5 for opposite side. FOLLOW-THROUGH STEPS 1. Connect battery ground strap (WP 0337 00), (WP 0338 00), or (WP 0339 00). 2. Install rear power plant access panel (see your -10). END OF TASK 0209 00-3/4 blank