TM-9-2350-277-20-2 Unit Maintenance Manual Volume 2 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 469 of 790
TM 9-2350-277-20-2 REPLACE GLOW PLUG HARNESS AND GLOW PLUGS 0209 00 THIS WORK PACKAGE COVERS: Removal (page 0209 00-1). Installation (page 0209 00-3). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0926 00, Item 65) Torque wrench (WP 0926 00, Item 81) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Rear power plant access panel removed (see your -10) Battery ground strap disconnected (WP 0337 00), (WP 0338 00), or (WP 0339 00) REMOVAL 1. Remove two bolts (1) and nuts (2) securing two clips (3) on glow plug harness (4) to two brackets (5) on left cylinder head (6). 2. Disconnect three plug ends (7) of glow plug harness (4) from glow plugs (8). 3. Remove three glow plugs (8) from left cylinder head (6). 4. Repeat Steps 1 - 3 for opposite side. 5. Disconnect and remove glow plug harness (4) from right side (9) of controller (10). 0209 00-1