TM-9-2350-277-20-2 Unit Maintenance Manual Volume 2 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 464 of 790
TM 9-2350-277-20-2 REPLACE AIR HEATER IGNITER — Continued 0207 00 INSTALLATION 1. Thread new electrode (2) into heater box assembly (3). TIGHTEN ELECTRODE TO 180 LB-IN (20 N m) TORQUE. Use torque wrench with 5/8 inch deep well socket. 2. Install harness boot end (1) on electrode (2) until positive engagement is felt. FOLLOW-THROUGH STEPS 1. Install power plant upper rear access panel (see your -10). END OF TASK 0207 00-2