TM-9-2350-277-20-2 Unit Maintenance Manual Volume 2 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 444 of 790
TM 9-2350-277-20-2 REPLACE PRIMARY AND SECONDARY FUEL FILTERS AND BRACKET — Continued 0203 00 REMOVAL NOTE New and Old Configuration refers to Variable Speed Fan Drive Configuration. Install covers on disconnected fuel lines, tubes, valves, and components during maintenance. Use tape, cloth, cardboard, or any appropriate material to prevent damage to components or accidental fuel spills. 1. Remove hoses (1) from elbows (2). (New Configuration is a tee with adapter (7) instead of elbow (2).) 2. Remove hoses (6) and (3) from two adapaters (5) and (4). 3. Remove screw (5), two washers (3), and clamp (4) from bracket (2). 4. Remove four screws (6), washers (7), locknuts (1), and bracket (2) from engine. Discard locknuts. 0203 00-2 Change 2