TM-9-2350-277-20-2 Unit Maintenance Manual Volume 2 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 419 of 790
TM 9-2350-277-20-2 REPLACE FUEL VENT HOSES, TUBES, AND FITTINGS (M577A3 AND M1068A3 ONLY) — Continued 0198 00 7. Install two elbows (1) and (2) in left fuel tank (3). 8. Install nipple (4) in elbow (2). 9. Install elbow (5) on nipple (4). 10. Connect vent hose (6) to elbow (1) at left fuel tank (3). 11. Connect vent hose (7) to elbow (5) at left fuel tank (3). 12. Connect two vent hoses (6) and (7) to two elbows (8) at filler neck (9). 13. Install two vent hoses (6) and (7) on seven weldnuts (10). Secure with seven clamps (11), new lockwashers (12), and screws (13). 14. Secure vent hose (7) to five weldnuts (14) with five clamps (15), new lockwashers (16), and screws (17). FOLLOW-THROUGH STEPS 1. Fill fuel tanks (see your -10). Check for leaks. 2. Install map board (see your -10). 3. Install work tables (WP 0578 00) or (WP 0581 00 and WP 0582 00). 4. Connect battery ground lead (WP 0338 00). 5. Start engine (see your -10). 6. Raise and lock ramp (see your -10). 7. Stop engine (see your -10). END OF TASK 0198 00-5/6 blank