TM-9-2350-277-20-2 Unit Maintenance Manual Volume 2 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 356 of 790
TM 9-2350-277-20-2 REPLACE FUEL SUPPLY HOSES, TUBES AND FITTINGS (M577A3 AND M1068A3 ONLY) — Continued 0193 00 23. Install leads (7), two elbows (5), and two tubes (3) and (6) on four weldnuts (11). Secure with four clamps (12), new lockwashers (13), and screws (14). 24. Connect personnel heater fuel hose (15) to shutoff valve (1). FOLLOW-THROUGH STEPS 1. Fill fuel tank (see your -10). 2. Connect battery ground lead (WP 0338 00). 3. Start engine (see your -10). Check for leaks. 4. Stop engine (see your -10). 5. Install power plant rear access panel (WP 0439 00). 6. Install rear compartment floor plates (WP 0539 00) or (WP 0544 00). 7. Start engine (see your -10). 8. Raise and lock ramp (see your -10). 9. Stop engine (see your -10). END OF TASK 0193 00-8