TM-9-2350-277-20-2 Unit Maintenance Manual Volume 2 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 325 of 790
TM 9-2350-277-20-2 REPLACE FUEL QUANTITY TRANSMITTER (ALL EXCEPT M577A3 AND M1068A3) 0190 00 THIS WORK PACKAGE COVERS: Removal (page 0190 00-1). Inspection (page 0190 00-2). Repair (page 0190 00-2). Installation (page 0190 00-3). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0926 00, Item 65) M a t e r i a l s / P a r t s Sealing compound (WP 0928 00, Item 56) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Battery ground strap disconnected (WP 0337 00) or (WP 0339 00) Fuel tanks drained (WP 0177 00) Fuel tank access covers removed (WP 0187 00) Tail lights and guards removed (WP 0298 00) REMOVAL NOTE Right and left fuel quantity transmitters are replaced the same. The following steps apply to one unit. 1. Disconnect lead (1) from transmitter (2). Circuit 30A is left tank transmitter lead. Circuit 31A is right tank transmitter lead. 2. Remove two screws (3), washers (4), bracket (5), and transmitter (2) from fuel tank (6). 3. Remove screw (7), washer (8), and clamp (9) that secures lead (1) to fuel tank (6). 4. Remove connector (10) and lead (1) from fuel tank (6). 0190 00-1