TM-9-2350-277-20-2 Unit Maintenance Manual Volume 2 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 311 of 790
TM 9-2350-277-20-2 REPLACE FUEL FILLER AND STRAINER PARTS (M577A3 AND M1068A3 ONLY) 0186 00 THIS WORK PACKAGE COVERS: Removal (page 0186 00-1). Cleaning (page 0186 00-2). Repair (page 0186 00-2). Installation (page 0186 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0926 00, Item 65) M a t e r i a l s / P a r t s Sealing compound (WP 0928 00, Item 56) Gasket (2) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Ramp lowered (see your -10) Battery ground lead disconnected (WP 0338 00) Filler cover and lock removed (WP 0183 00) Filler cap removed (WP 0185 00) Fuel tanks drained below filler flange level (WP 0178 00) REMOVAL 1. Disconnect two fuel tank vent hoses (2) from two elbows (3) and remove elbows from filler neck (4). 2. Disconnect APU fuel return tube (5) from tee (6). 3. Disconnect engine fuel return hose (7) from elbow (8). 4. Disconnect fuel tank vent tube (9) from elbow (10) and remove elbow from filler neck (4). 5. Remove elbow (8) from tee (6) and tee from filler neck (4). 6. Remove 12 screws (11) and nuts (12) that secure flange (13), filler neck (4), and two gaskets (14) and (15) to hull top opening. Discard gaskets. 7. Remove strainer element (16), strainer assembly (17), and bushing (18) from hull. 8. Remove screw (19), nut (20), washer (21), clamp (22), and ground lead (23) from filler tube (24). 0186 00-1