TM-9-2350-277-20-2 Unit Maintenance Manual Volume 2 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 310 of 790
TM 9-2350-277-20-2 REPLACE FILLER CAP AND STRAINER PARTS (M577A3 AND M1068A3 ONLY) — Continued 0185 00 INSTALLATION 1. Align mounting holes in boot (9) with mounting holes in hull top. Secure boot (9) to inside fuel tank neck with clamp (8). 2. Secure filler neck (2), retainer (7), strainer (6), and filler cap and chain assembly (1) to hull top with twelve screws (5). 3. Install new lockwire (4) through heads of twelve screws (5). Secure with double twist method. 4. Compress C ring (3) and install through filler neck (2). NOTE If fuel cap has pressure relief valve, cap is installed by turning cap clockwise until tight, then push pressure relief handle down. 5. Fasten filler cap and chain assembly (1) in filler neck. FOLLOW-THROUGH STEPS 1. Connect battery ground lead (WP 0338 00). 2. Close and lock combat filler cover (see your -10). END OF TASK 0185 00-2 Change 1