Sign up to sell your inventory with NSN Lookup

TM-9-2350-277-20-2 Unit Maintenance Manual Volume 2 M113A3 M577A3 M1064A3 M1068A3 M58 Download

Page 273 of 790

TM 9-2350-277-20-2 CLEAN FUEL CAP VENT AND FILTER SCREEN — Continued 0176 00 d. If grommet (1) is clogged or dirty, remove and clean with cleaning compound and clean cloth. e. Reinstall grommet (1) in fuel cap (2). Make sure it is properly seated. WARNING Air pressure in excess of 30 psi (207 kPa) can injure personnel. Do not direct pressurized air at yourself or others. Always wear goggles. f. Clean screen cap (3) with cleaning compound. Dry with compressed air. g. Reinstall screen cap (3) in fuel cap (2). 4. Squeeze spring plate (4), and install in filler neck (5). 5. Install fuel cap (2), with attached chain (6) in filler neck (5). 6. Close ballistic cover (7). END OF TASK 0176 00-3/4 blank Change 1