TM-9-2350-277-20-2 Unit Maintenance Manual Volume 2 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 269 of 790
TM 9-2350-277-20-2 REPLACE EXHAUST EVACUATOR VALVE AND CONNECTOR β Continued 0175 00 5. Move air cleaner (5) in position. Secure air cleaner to sponson with three screws (8) and washers (9). TIGHTEN SCREWS TO 32-34 LB-FT (43-46 N m) TORQUE. USE TORQUE WRENCH. 6. Install support (10), two screws (11), new lockwashers (12), and ο¬at washers (13). 7. Slide hose (3) on valve onto air cleaner adapter (14). Secure hose with two clamps (4). FOLLOW-THROUGH STEPS 1. Lower power plant grill (WP 0464 00). 2. Close power plant front access door (see your β10). 3. Raise trim vane (see your β10). END OF TASK 0175 00-3/4 blank