TM-9-2350-277-20-2 Unit Maintenance Manual Volume 2 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 219 of 790
Change 2 TM 9-- 2350- -277--20--2 0159 00--5 9. Coat threads on elbow (8) with a pipe sealing compound and install in left side of cylinder block. Tighten securely with 13. Connect lower hose assembly (9) to elbow (10) in oil pan. Tighten securely. Torque screw to 13-17 lb-ft (18-23 N m). 14. If oil cooler is installed, install screw (11) through clip (14), new lockwasher (12), and flat washer (13) in oil cooler. 12. Connect upper hose assembly (5) to elbow (8) in cylinder block. Tighten securely. port facing rear and downward at a 45 degree angle. 11. Install elbow (6) in top of check valve (7) and tighten securely. If removed, install clip (14) on check valve. 10. Install elbow (10) in oil pan and tighten securely with port facing outward from engine. — Continued 0159 00 REPLACE LEFT AND RIGHT AIR BOX DRAIN CHECK VALVES AND TUBES securely. 15. Connect hose assembly (5) to elbow (6) in check valve (7) and hose assembly (9) to bottom of check valve. Tighten S