TM-9-2350-277-20-2 Unit Maintenance Manual Volume 2 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 214 of 790
TM 9-2350-277-20-2 REPLACE ENGINE MOUNTS — Continued 0158 00 INSTALLATION 1. Install screw (1) and washer (2) in engine mount base (7) . NOTE Do not torque nuts until engine mounts are properly aligned on hull mounts. 2. Lightly lubricate two mounts (4) with water. Install washer (3) , mount (4) , block (5) , mount (4) , and two washers(2) and washer(3) on engine. Secure with new locknut (6) . Tighten nut to 100-120 lb-ft (136-163 N m) torque. FOLLOW-THROUGH STEPS 1. Install power plant (WP 0156 00). 2. Connect battery ground strap (WP 0337 00) , (WP 0338 00) , or (WP 0339 00) . END OF TASK 0158 00-2