TM-9-2350-277-20-1 Unit Maintenance Manual Volume 1 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 98 of 858
TM 9-2350-277-20-1 INTRODUCTION TO HOW TO USE TROUBLESHOOTING—Continued 0005 00 Check the title to make sure you are troubleshooting the correct system for the problem. Read the INITIAL SETUP carefully and make sure you have all items listed. Some access steps in Equipment Conditions may not need to be performed depending on the fault location. You decide which are necessary for your particular problem. ENGINE CRANKS SLOWLY TM 9-2350-277-20-1 Engine stopped (see your -10) Vehicle blocked (see your -10) General mechanics tool kit: automotive (WP 0926 00, Item 65) STE/ICE-R test set (WP 0926 00, Item 61) Equipment Condition See your -10 References INITIAL SETUP: Maintenance Level Unit Tools and Special Tools Personnel Required Unit Mech Helper (H) 0020 00 This is the first block of the troubleshooting task. Step 1 has you performing a STE/ICE test. Go to the page shown. You will be using a STE/ICE test procedure for this step. Come back to this block when you complete the test. NO 1. Perform STE/ICE test 67 battery voltage (WP 0124 00). 0005 00-6 Change 2