TM-9-2350-277-20-1 Unit Maintenance Manual Volume 1 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 611 of 858
TM 9-2350-277-20-1 STE/ICE TEST 25 FUEL RETURN PRESSURE 0120 00 THIS WORK PACKAGE COVERS: Test (page 0120 00-1). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit P e r s o n n e l R e q u i r e d Unit Mech 63t10 R e f e r e n c e s See your -10 TM 9-4910-571-12&P E q u i p m e n t C o n d i t i o n Engine stopped (see your –10) Vehicle blocked (see your –10) STE/ICE hooked up to DCA 6 (WP 0117 00) 1. SELECT TEST 25. 2. PERFORM OFFSET TEST. a. Push and hold TEST button until CAL appears. Release TEST button. b. If VTM reads between -10 and +10, offset test passes. c. If offset test fails, go to: STE/ICE Test 25 Diagnostic Troubleshooting (WP 0144 00). 3. PRESS AND RELEASE TEST BUTTON. 4. START ENGINE AND RUN AT GOVERNED NO LOADSPEED (WP 0155 00). a. If VTM reads 18 (psi) or more, test passes. b. If error message appears, see TM 9-4910-571-12&P. c. If readings are erratic or cannot be obtained, go to: STE/ICE Test 25 Diagnostic Troubleshooting (WP 0144 00). 5. STOP ENGINE (see your –10). 6. RETURN TO TROUBLESHOOTING. 0120 00-1/2 blank