TM-9-2350-277-20-1 Unit Maintenance Manual Volume 1 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 609 of 858
TM 9-2350-277-20-1 STE/ICE TEST 24 FUEL SUPPLY PRESSURE 0119 00 THIS WORK PACKAGE COVERS: Test (page 0119 00-1). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit P e r s o n n e l R e q u i r e d Unit Mech 63T10 R e f e r e n c e s See your -10 TM 9-4910-571-12&P E q u i p m e n t C o n d i t i o n Engine stopped (see your –10) Vehicle blocked (see your –10) STE/ICE hooked up to DCA 6 (WP 0117 00) 1. SELECT TEST 24. 2. PERFORM OFFSET TEST. a. Push and hold TEST button until CAL appears. Release TEST button. b. If VTM reads between -10 and +10, offset test passes. c. If offset test fails, go to: STE/ICE Test 24 Diagnostic Troubleshooting (WP 0143 00). 3. PRESS AND RELEASE TEST BUTTON. 4. START ENGINE AND RUN AT GOVERNED NO LOADSPEED (WP 0155 00). a. If VTM reads 55 (psi) or more, test passes. b. If error message appears, see TM 9-4910-571-12&P. c. If readings are erratic or cannot be obtained, go to: STE/ICE Test 24 Diagnostic Troubleshooting (WP 0143 00). 5. STOP ENGINE (see your –10). 6. RETURN TO TROUBLESHOOTING. 0119 00-1/2 blank