TM-9-2350-277-20-1 Unit Maintenance Manual Volume 1 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 597 of 858
TM 9-2350-277-20-1 DRIVER’S VISION ENHANCER (DVE) DISPLAY DOES NOT WORK (M58 ONLY) 0116 01 INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General mechanic’s tool kit: automotive (WP 0926 00, Item 65) Multimeter (WP 0926 00, Item 30) P e r s o n n e l R e q u i r e d Unit Mech R e f e r e n c e s See your -10 TM 11-5855-304-TBD See M58 Wiring Diagram (FO-7) E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) DVE power switch off (see your –10) NOTE These procedures cover the DVE with a commander’s DVE installed. Cable 12461152 includes power and video cable to commander’s display and power to the driver’s display through cable 12460610. See TM TBD for the sensor set assembly or display. If vehicle does not have commander’s DVE display installed, power cable 12460610 is plugged directly into DVE power switch. If problems in operation are because of the sensor set assembly or driver’s/commander’s display, see TM 11-5855-304-TBD (this will apply only if TBD TM is at unit level maintenance (-24). If TBD TM is -34 level only, then this will be changed to identify the items needed to be turned into DS maintenance for repairs). T 1. Operate driver’s vision enhancer (see your –10). 2. Does driver’s DVE display work? YES NO GO TO AY (PAGE 0116 01-3) Y 1. Is it an intermittent problem? YES NO YN 1. Beyond unit maintenance. Sensor set assembly or display may be faulty. See TM TBD. 2. Notify supervisor. 0116 01-1 Change 1