TM-9-2350-277-20-1 Unit Maintenance Manual Volume 1 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 174 of 858
TM 9-2350-277-20-1 ENGINE CRANKS BUT WON’T START BELOW 40 F (GLOW PLUGS ARE USED)—Continued 0023 00 4Y 1. Push START switch and hold until engine starts. 2. Did engine start? YES NO 4YN 1. Push hand control throttle in as far as it will go (see your -10). 2. Do not touch foot throttle (see your -10). 3. Repeat glow plug cold start procedure (see your -10). 5Y 1. Slowly pull hand control throttle (1) out until engine speed reaches 1800 RPM. 2. Slowly push hand control throttle (1) in until engine speed reaches 1000-1200 RPM. 3. Allow engine to reach normal operating temperature (190-230 F) (see your -10). 4. Does engine run smoothly? YES NO 5YN 1. Go to Engine Runs Rough, Stalls or Doesn’t Put Out Full Power (WP 0024 00). 2. Verify no faults found. 6Y 1. Stop engine and try normal start (see your -10). 2. Verify no faults found. 0023 00-2