TM-9-2350-277-20-1 Unit Maintenance Manual Volume 1 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 161 of 858
TM 9-2350-277-20-1 ENGINE CRANKS BUT WILL NOT START 0021 00 INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0926 00, Item 65) M a t e r i a l s / P a r t s Suitable container P e r s o n n e l R e q u i r e d Unit Mechanic Helper (H) R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Driver’s power plant access panels removed (see your -10) Power plant rear access panels removed (see your -10) Trim vane lowered (see your -10) Power plant access door open (see your -10) T 1. Inspect condition and operation of fuel cut off cable assembly (WP 0220 00). 2. Is cable assembly in good condition and in proper adjustment? YES NO TN 1. Replace and/or adjust fuel cut off cable assembly (WP 0220 00). 2. Verify no faults found. Y 1. Disconnect engine fuel return line (1) from quick disconnect fitting (2). 2. Depress plunger on quick disconnect fitting (1). Catch fuel in suitable container. 3. Crank engine with plunger depressed. Have helper assist. 4. Does fuel flow out while cranking engine? YES NO GO TO AY (PAGE 0021 00-2) 0021 00-1