TM-9-2350-277-20-1 Unit Maintenance Manual Volume 1 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 140 of 858
TM 9-2350-277-20-1 ENGINE DOES NOT CRANKâContinued 0016 00 B8Y 1. Remove harness 12349813 circuit 14B plug (1) from harness 12349881 circuit 14 jack (2). 2. Measure resistance between harness 12349881 circuit 14 jack (2) and circuit 14 plug (3). 3. Does VTM read 0 ohms? YES NO B8YN 1. Install harness 12349873 plug on harness 12349881 jack. 2. Repair harness 12349881 circuit 14 (WP 0382 00). 3. Install instrument panel (WP 0279 00). 4. Verify no faults found. B9Y 1. Install harness 12349813 plug on harness 12349881 circuit 14 jack. 2. Repair harness 12349881 circuit 74 (WP 0382 00). 3. Install instrument panel (WP 0279 00). 4. Verify no faults found. CY 1. Turn MASTER SWITCH OFF. 2. Set up STE/ICE test 91 TM 9-4910-751-12&P. 3. Remove transmission controller (WP 0386 00) or (WP 0387 00). 4. Place transmission controller in SL position. 5. Measure resistance between pin M (1) and pin N (2) on controller jack (3). 6. Does VTM read 0 ohms? YES NO CYN 1. Replace transmission controller (WP 0386 00) or (WP 0387 00). 2. Verify no faults found. 0016 00-6 Change 1