TM-9-2350-277-20-1 Unit Maintenance Manual Volume 1 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 137 of 858
TM 9-2350-277-20-1 ENGINE DOES NOT CRANKâContinued 0016 00 BY 1. Inspect harness 12349873 circuit 6 (1) and 6A (2) terminal ends on starter for corrosion and/or damage. 2. Remove harness 12349873 circuit 6/6A plug (3) from harness 12349881 jack (4) at vehicle bulkhead. 3. Inspect condition of plug and jack pins. 4. Are all parts free from corrosion and damage? YES NO BYN 1. Clean and repair parts as required (WP 0382 00). 2. Verify no faults found. B2Y 1. Install harness 12349873 circuit 6/6A plug to harness 12349881 jack at vehicle bulkhead. 2. Perform STE/ICE test 70 starter solenoid voltage (WP 0127 00). 3. Does VTM read less than 17 volts? YES NO B2YN 1. Replace starter assembly (WP 0259 00). 2. Verify no faults found. B3Y 1. Turn MASTER SWITCH to ON. 2. Is STEERING LOCKED indicator ON? YES NO GO TO CY (PAGE 0016 00-6) 0016 00-3 Change 1