TM-9-2350-277-10 Operator Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 713 of 868
TM 9-2350-277-10 SERVICE BILGE PUMPS — Continued 0096 00 REAR BILGE PUMP 1. Lower ramp. See task: LOWER/RAISE RAMP (WP 0012 00). 2. Remove six screws, washers and rear floor plate from floor supports. Use 1/2 inch drive socket wrench handle and 3/4 inch socket. 3. Service rear bilge pump. Use flashlight. 4. Remove mud and debris from bilge pump and strainer. If bilge pump needs additional cleaning, notify unit maintenance. 5. Clean vent hole. Use a wire and run it back and forth in vent hole a few times. 0096 00-5