TM-9-2350-277-10 Operator Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 712 of 868
TM 9-2350-277-10 SERVICE BILGE PUMPS — Continued 0096 00 10. Position bilge pump strainer on weld nuts and secure with two flat washers, lockwashers and screws. Use cross tip screwdriver. 11. Connect lead to bilge pump. 12. Install front access cover on hull and secure with four washers and screws. Use 1/2 inch drive socket wrench handle and 3/4 inch socket. 13. Close power plant access door. See task: OPEN/CLOSE POWER PLANT ACCESS DOOR (WP 0011 00). 14. Stow trim vane. See task: LOWER/STOW TRIM VANE (WP 0039 00). 0096 00-4