TM-9-2350-277-10 Operator Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 692 of 868
TM 9-2350-277-10 REMOVE/INSTALL (T150) TRACK SHOE – Continued 0093 01 0093 01-2 INSTALL (T150) TRACK SHOE WARNING Loss of track end connector can cause track throw and loss of vehicle control. Soldiers can be killed or injured. Mark end connector bolts. Notify unit maintenance to torque bolts. NOTE Position track shoes at slight angle to install end connectors on both shoe pins. Proper tightening of end connector bolts keeps them from coming loose. Have unit maintenance properly torque as soon as possible. 1. Install new track shoe on track. a. Install two track pin alignment tools over track shoe pins. Install two track end connectors on track shoes. Remove track pin alignment tools before driving end connectors flush with pin ends. b. Drive end connectors flush with pin ends and install bolts on each end connector. 2. Mark track that was replaced so bolts can be torqued later. 3. Join track (WP 0092 01). 4. Stow spare track shoe. 5. Notify unit maintenance to torque bolts. END OF TASK Change 2 c. Tighten bolts using extension wrench handle with socket.