TM-9-2350-277-10 Operator Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 689 of 868
TM 9-2350-277-10 2. Remove nut from track pin. Use 1/2 inch drive socket handle and 11/16 inch socket. 3. Drive track pin part way out with short end of drive pin punch. Wear industrial goggles and use hammer. Remove drive pin punch. 4. Drive track pin all the way out. Wear industrial goggles. Use hammer and long end of drive pin punch. 5. Coat track pin with oil or grease. Install nut flush on track pin. Use 1/2 inch drive socket handle and 11/16 inch socket. 6. Place track shoe in lower part of track. Align track pin holes. 7. Obtain 20 degree angle between track shoes to be connected. 0093 00-5 Change 2 00 REMOVE/INSTALL (T130) TRACK SHOE — Continue 0093