TM-9-2350-277-10 Operator Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 672 of 868
TM 9-2350-277-10 6. Install a nut on the other end of the track pin. Tighten both nuts until 2 or 3 threads show between the nuts and the ends of the pin or about 1/8 of an inch. Use 1/2 inch drive socket handle and 11/16 inch socket. 7. Mark nut so unit maintenance can torque it. 8. Remove two track fixtures. Use adjustable wrench. 9. ADJUST TRACK TENSION (WP 0091 00). 0092 00-8 Change 2 BREAK/JOIN (T130) TRACK — Continued 0092 00